CLXF2-1900×125

铝型材复合仿形铣床

Multi Spindle Copy Router

It is used for processing all kinds of holes, grooves and water-slots on alumi-
num and PVC protiles. It has the features of compact structure, nice design
and the air pressure drives large horizontal shift range the clamping of the
profile. The easy copy-routing plate replacement, large useful scope, high
efficiency and convenient operation achieve the continuous processing and
safe operation. The horizontal and vertical milling heads can finish the mill-
ing in two directions at one time.
CLXF2-1900×125复合仿形铣床用于加工铝幕墙、门窗型材的各
类型孔、槽、流水口等。本机结构紧凑，造型美观。型材夹紧和电机启
动均采用气动控制，安全可靠。靠模调整简单，更换方便。使用大功率
变频电主轴，适应范围广，可实现连续加工，生产效率高，操作简单安
全。设有水平、垂直两个方向的动力头，型材一次装夹可完成两个方向
的加工。
Equipment Features:设备特点：
Air pressure
Air consumption
Input power
Voltage
Spindle rational speed
Copy-routing Range
Processing roughness
Diameter of the milling cutters
Profile section
Overall dimension（L×W×H）
Weight
0.5～0.8Mpa
20L/min
3Kw
380V/220V 50Hz
电机转速motor rotary speed 0-12000r/min（changeable speed）
1900×125
Ra12.5μm
φ5、φ8、
UP：W230×H150～210
　　　　　SIDE：W230×H135
3300×1400×1700mm
400kg
工作气压
耗气量
输入功率
输入电压
变频电主轴
仿形范围
加工粗糙度
铣刀直径
加工型材截面
机床外形尺寸(含左右定尺)
重量